Month: June 2025

A fabric-wrapped acoustic panel is a filter. Nobody sold it as one, and the acoustician who specified it would object to the word, but a 50mm slab of mineral wool behind a stretched polyester weave, hung at head height in a room where forty people breathe eight hours a day, does what filters do. It catches things. Then it holds them, because there is no airflow through it and nothing to dislodge what has settled into the pile.

I have been cleaning London offices for long enough to remember when the walls were painted plasterboard and the noise problem was solved by putting people in rooms. Open plan changed that, and the fix arrived in fabric: wall panels, hanging rafts, felt screens, those honeycomb baffles that came in around 2018 and are now in every second office between Old Street and Aldgate. The acoustics improved. The cleaning specification did not change at all.

Why do acoustic panels collect more than ordinary dust?

Soft furnishings in an office behave like carpet turned sideways. The difference is that carpet gets vacuumed four or five times a week and a wall panel gets vacuumed when somebody notices a mark on it, which in practice means never.

The material matters. Most panels in the London market are polyester fibre or mineral wool wrapped in woven polyester or in a PET felt made from recycled bottles. Both weaves are open enough to let sound through – that is the entire point of them – which means they are open enough to let particulate through as well. Fine dust does not sit on the surface where a duster could take it off. It travels into the first few millimetres of the weave and lodges against the fibres, held there by static and by the tackiness that airborne cooking grease gives everything in an office with a kitchen on the same floor.

Static is the part people underestimate. A polyester weave in a dry, heated office in February carries enough charge to pull particulate out of moving air rather than waiting for gravity to deliver it.

What is in there when you take a sample?

I have had panel fabric tested twice, both times out of curiosity rather than because a client asked. The results were unglamorous and slightly disgusting: skin cells, textile fibres from clothing, and the fine black grit that comes off the Underground and travels into buildings on coats and shoes.

That last one is the London-specific problem. Anyone who has wiped a windowsill in a building above a deep tube line knows the colour of it. It is iron oxide and carbon, thrown off by braking and by wheel-rail contact, and the particles are small enough to stay airborne for hours. They settle into fabric and they stain it grey-brown from the inside, which is why panels in Bank or Moorgate offices look tired at four years while the same product in a Richmond business park still looks new.

What does a loaded panel do to the air people are breathing?

Here is where I will be blunt, because the industry tends to hedge on this and I think the hedging is dishonest. A dirty acoustic panel is a reservoir. Reservoirs release.

Anything mounted on a wall in an occupied office is subject to disturbance – doors swinging, air conditioning throw, someone shoving a chair back against a panel. Each disturbance re-suspends a fraction of what has accumulated. The dose is small on any given occasion and the accumulation is what counts, because the panel has been concentrating four years of airborne material into a surface that sits a metre from somebody’s face.

Then there is moisture. Panels near a poorly balanced AC diffuser see condensation cycles, and mineral wool that goes damp and dries repeatedly with organic material in it will grow things. I have pulled panels off walls in Hammersmith and found the back face spotted black where the plasterboard behind was cold. The room smelled faintly of a caravan. Everyone in it had been complaining of headaches for eighteen months, and the facilities team had been chasing a ventilation system that was working perfectly.

Nobody writes panel condition into an indoor air quality survey. Those measure CO2, particulate counts and volatile compounds in the air on the day, which tells you about the ventilation and nothing whatever about the twelve square metres of loaded fabric on the north wall.

The Canary Wharf job that changed how I quote

Bank Street, E14, in a fit-out five years old when we picked up the contract. Two floors, roughly 340 square metres of fabric-wrapped panelling and about ninety hanging rafts over the desks. The rafts were the ones that got me. They were pale grey when installed and pale grey from below, because you view a raft edge-on and the dust is on the top face.

We got a ladder up. The top surface of every raft carried a mat of grey lint three or four millimetres thick that you could have lifted off in one piece, and near the kitchen it had gone tacky and darker where the extraction had never been up to the job. Five years of it. The client had been paying for a nightly clean that entire time and the specification ran to floors, desks, glass, kitchens, washrooms. No panels, no rafts. Nobody had written it into the spec, so nobody had looked.

We sent the photographs up and got the response I have come to expect: surprise, then a question about whether it was safe. Five years of concentrated office air sitting above people’s heads is some way short of dangerous, and I would still not want it over my own desk.

How do you clean an acoustic panel without destroying it?

Carefully, and mostly dry.

The first rule is that you do not treat a panel like upholstery. Upholstery has a substrate that tolerates moisture and agitation. An acoustic panel has mineral wool or loose polyester fibre behind a fabric stretched onto a frame under tension, and both the core and the tension are ruined by water.…